Search results for 'msds filler g'

Items 1 to 10 of 121 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Ascending Direction
  1. CMS Filler G

    CMS Filler G

    Light weight filler powder.


    Learn More...
  2. Ebalta SG130L/PUR11

    Ebalta SG130L/PUR11

    Ebalta SG130L/PUR 11 is an unfilled, low viscosity 2 component polyurethane system and final properties are dependent on type and quantity of fillers used.

    SG130L/Pur 11 will accept high filler loading and can subsequently be cast in larger volumes.


    Learn More...
  3. Petrobond

    Petrobond

    CMS PETROBOND is a waterless moulding sand designed for use by the non-ferrous foundries to produce castings when extremely fine casting finish is desirable.

    It is supplied in a convenient, ready-for-use form. As it is a non-drying oil based sand mix, it can be readily reclaimed and reused several times after casting and knock-out operations.
     


    Learn More...
  4. Cadmium

    Cadmium

    High Purity Cadmium 99.9%


    Learn More...
  5. Zircoat Satin Y77

    Zircoat Satin Y77

    A premium quality solvent based zircon coating for foundry cores and moulds used in ferrous and non-ferrous casting.

    CMS ZIRCOAT SATIN Y 77 Baume is supplied in a convenient, ready-to-use form for application by brushing. It is formulated using premium grade Australian Zircon. Unlike conventional coatings, it is unique and versatile in that it offers ease of application, all-round efficiency and economic performance. It's unique suspension agents allow for a homogenous coating thickness without constant agitation.
     


    Learn More...
  6. Styrotherm Insulating Tiles

    Styrotherm Insulating Tiles

    Lightweight insulation tile used for large feeders and other high temperature insulation applications.

    Styrotherm-G riser lining tiles do not evolve any gas during casting and because of the low density of approximately 0.6 g/cm3 cause an extension factor of solidification of 2.2. This corresponds to a modulus extension factor of 1.45

    The tiles are pale yellow in colour, have a trapezoidal profile section, and are machined for improves flatness and accuracy.
     


    Learn More...
  7. Prover Flux

    Prover Flux

    General purpose crystal flux for the removal of dross and oxides from molten Aluminium.


    Learn More...
  8. AlTab Mn

    AlTab Mn

     ALTab Mn tablets contain concentrated additives for the precise compositional adjustment of alloy for your melt.

    AlTab's are also available with Cr, Cu & Fe.


    Learn More...
  9. Iron Cement

    Iron Cement

    DESCRIPTION :                                      

    IRON CEMENT is an air-setting material designed as a “cosmetic repair compound” for surface defects in ferrous castings. It is supplied in a dry powder form for mixing with appropriate amount of water to a suitable paste-like consistency.

    PHYSICAL PROPERTIES :

    Setting Mechanism         : Air-setting
    Physical Form                 : Dry Powder
    Colour                             : Grey   
    Diluent For Mixing           : Water
     


    Learn More...
  10. S660

    S660

    S660 grade.


    Learn More...

Items 1 to 10 of 121 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Ascending Direction