Search results for 'iron'

Items 1 to 10 of 29 total

per page
  1. 1
  2. 2
  3. 3

Set Ascending Direction
  1. Thermal Analysis - Cast Iron

    Thermal Analysis - Cast Iron

    Tracing and analyzing the temperature of a cooling and solidifying iron sample is named Thermal Analysis. The plateaus of liquidus and solidus temperatures of the cooling iron sample in a cup allow the calculation of carbon equivalent, carbon and silicon. Relevant formulas in our instruments may be used to calculate physical properties of the iron casting.

    Our range of QuiK-Cup cups (QuiK stands for Quartz insulated type K thermocouple) are designed for various types of cast iron, unalloyed, alloyed, solidifying grey or white and taken from Cupola through runner, furnace or tundish.

    Sensor: QuiK-Cup 

    Learn More...
  2. Furan


    SQG series No Bake Furan Resin is a kind of environmentally friendly foundry binder.

    Different types of resins can be used for steel casting, iron casting and non-ferrous casting. They appear pale yellow to red brown transparent liquid with the following characteristics:

    •    Low viscosity increases the speed of resin addition and the fluidity of moulding sand.

    •    Low free Formaldehyde content and less odour. This improves working condition and lightens environmental pollution.

    •    High strength reduces resin addition ratio, which means lower cost and higher quality of castings.

    •    Good collapsibility, high precision of casting with clear-cut and clean surface reduces the workload for cleaning and improves work efficiency.

    Learn More...
  3. Plate Vibrator

    Plate Vibrator

    The Cleveland Vibrator Co. LA Series of pneumatic industrial vibrators are designed specifically for optimizing match-plate operations, improving quality and reducing cost in the Foundry.
    DURABLE - one-piece, ductile iron housing and spring-less design ensure long effective life and minimal down time.
    VERSATILE - range of vibration intensities and swiveling air intake ensure a good fit for your specific match-plate operation
    EASY - comes with mounting fasteners for quick set-up

    Learn More...
  4. Iron Cement

    Iron Cement

    DESCRIPTION :                                      

    IRON CEMENT is an air-setting material designed as a “cosmetic repair compound” for surface defects in ferrous castings. It is supplied in a dry powder form for mixing with appropriate amount of water to a suitable paste-like consistency.


    Setting Mechanism         : Air-setting
    Physical Form                 : Dry Powder
    Colour                             : Grey   
    Diluent For Mixing           : Water

    Learn More...
  5. Iron Ore

    Iron Ore

    Slag additive.

    Learn More...
  6. CMS Spuncoat GW

    CMS Spuncoat GW

    CMS SPUNCOAT GW is a water based graphitic coating. It is
    used as a die-release-agent in the centrifugal casting process for ferrous and non-ferrous castings.
    It is formulated using a high purity crystalline graphite and selected inert refractory powders suspended in water using efficient suspension agents and wetting agents.

    CMS SPUNCOAT GW is supplied in a ready-to-use form and can be diluted with water if required to suit application method employed.

    Learn More...
  7. Synchro ERP

    Synchro ERP

    Synchro is completely dedicated to and specializes in the Cast Metal Industry. Synchro ERP a specific software ERP system (Enterprise Resource Planning) developed to meet the unique and exclusive requirements for each of the sub manufacturer’s within the sector:

    Iron Foundry ERP Software
    Steel Sand Foundry ERP Software
    Centrifugal Casters ERP Software
    Aluminum Sand Foundry (Aluminium) ERP Software
    Diecasting (Pressure Diecaster) ERP Software
    Gravity Diecasting (Permanent Molder) ERP Software
    Precision Moulder (Precision Molder) ERP Software
    Investment Casting ERP Software
    Loss Wax & Lost Foam Casting ERP Software


    Learn More...
  8. Iron Melting Flakes

    Iron Melting Flakes

    Flakes of compacted Sponge Iron powder. Based on carbon-reduced Sponge Iron powder, annealed. Approximate size: 15 mm wide, 1.5 - 3 mm thick

    High purity and high dissolution rate makes this product very useful as an alternative in stainless steel melts as well as a raw material in manufacturing of chemicals.


    Learn More...
  9. Ferro Sulphur (Iron Pyrite)

    Ferro Sulphur (Iron Pyrite)

    In foundries, during electric melting, residual sulphur level decreases due to cleaner melting practices and the use of low sulphur steel scrap. It is found that iron does not readily respond to inoculants if Sulphur is below 0.04%. Then it is necessary to resulphurize by using Ferrous Sulphide to hold the level in 0.05% to 0.12% range.

    In Alloy And Stainless Steel Industries To Control Hydrogen Embrittlement It is very convenient and economic to use Ferrous Sulphide for resulphurization in these steels to hold the right level of 'S' and ensuring not to drop 'S' level below 0.015% as these steels carry a minimum sulphur specification.


    Learn More...
  10. Ferro Phosphorous

    Ferro Phosphorous

    Increased fluidity in gray iron. In steel, P will improve strength, machinability and atmospheric corrosion resistance.

    Learn More...

Items 1 to 10 of 29 total

per page
  1. 1
  2. 2
  3. 3

Set Ascending Direction