Search results for 'de gassing alum/?option=co'

Items 1 to 10 of 91 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Ascending Direction
  1. CMS Sodasil Premium

    CMS Sodasil Premium

    A semi-translucent, liquid Sodium Silicate binder for the production of foundry cores and moulds by Silicate/CO2 or Ester Catalysed Silicate processes. It has an organic additive incorporated to assist breakdown or shakeout after casting.

     


    Learn More...
  2. CMS Sodasil G

    CMS Sodasil G

    A colourless, semi-translucent liquid Sodium Silicate binder for the production of foundry cores and moulds by Silicate/CO2 process. 


    Learn More...
  3. Furan

    Furan

    Introduction
    SQG series No Bake Furan Resin is a kind of environmentally friendly foundry binder.

    Different types of resins can be used for steel casting, iron casting and non-ferrous casting. They appear pale yellow to red brown transparent liquid with the following characteristics:

    •    Low viscosity increases the speed of resin addition and the fluidity of moulding sand.

    •    Low free Formaldehyde content and less odour. This improves working condition and lightens environmental pollution.

    •    High strength reduces resin addition ratio, which means lower cost and higher quality of castings.

    •    Good collapsibility, high precision of casting with clear-cut and clean surface reduces the workload for cleaning and improves work efficiency.
     


    Learn More...
  4. CMS Rezcoat

    CMS Rezcoat

    CMS REZCOAT is a low viscosity, solvent based core and mould coating for hardening most sand surfaces. It is specifically designed for Green sand and Silicate sand in both ferrous and non-ferrous applications.
     


    Learn More...
  5. Graphcoat S Spray

    Graphcoat S Spray

    A grey-black Solvent Based Graphitic coating for foundry cores and moulds.

    CMS GRAPHCOAT  S-Spray is formulated using a high purity crystalline graphite and supplied in a pre-diluted, ready-to-use form.

     


    Learn More...
  6. Nickel Magnesium

    Nickel Magnesium

    NiMg is a Nickel based alloy containing 14 to 18 percent Magnesium and a controlled amount of rare earth elements. NiMg is used almost exclusively by the Foundry Industry as an additive for the production of Ductile Iron. To a lesser extent the alloy is also used to deoxidize and/or desulphurize steels, cast irons and Nickel alloys.


    Learn More...
  7. Trueline Dowels

    Trueline Dowels

    True-Line Steel Dowels are broached and flange-slotted which means that:
    * They can be inserted easily, accurately and quickly.
    * Because of the slotted flange, the Bushing and Pin can be removed with wrenches that are either flange-slotted or broached, even if the Pin is broken.
    * Tapered shaft design of Pin and square shoulders contribute to accurate alignment.
     


    Learn More...
  8. Ebaboard PW920

    Ebaboard PW920

    Ebaboard PW 920  is a synthetic board material, that is of a stable uniform structure and parallel faces. It can be cut and shaped  using regular woodworking tools.

    During the process of machining, routing etc., there is a minimum generation of dust.

    Models produced from ebaboard PW 920, are virtually shrinkage free good edge strength, and are extremely stable due to very low water absorption.


    The boards can be easily bonded using ebaboard PW 920 adhesive. Contains no halogene, flexibilisator, solvent or FCKW.

    Density 1.2g/cm3


    Learn More...
  9. Deox Tubes

    Deox Tubes

     Copper tubes containing Phosphor copper for deoxidising Copper based metals.


    Learn More...
  10. Ferro Chrome - High Carbon

    Ferro Chrome - High Carbon

    As standard we stock HCFeCr with 8% Carbon.

    We have both lump and crushed available.

    Other grades and specifications are available on request.


    Learn More...

Items 1 to 10 of 91 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Ascending Direction