Search results for 'de gas tablet'

Items 1 to 10 of 92 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Ascending Direction
  1. Mortar 1650AW

    Mortar 1650AW

    DESCRIPTION :                                       

    CMS MORTAR 1650AW is a general purpose super duty Air-setting mortar with exceptional properties and uses. It is supplied Wet, in a paste-like ‘ready-for-use’ consistency.

    CMS MORTAR 1650AW can be used in a myriad of ways to bond, coat, repair and patch a wide range of refractory products.

    Ideal for patching cracked Investment Casting Shells.


    Learn More...
  2. S660

    S660

    S660 grade.


    Learn More...
  3. CMS Magcoat S

    CMS Magcoat S

    A premium quality solvent based Magnesite coating for foundry cores and moulds.
    CMS MAGCOAT S consists of highest quality Australian Magnesite refractory powders together with a well balanced suspension and binder system to provide excellent coating properties. The binders used exhibit both low and high temperature bonding properties.
     


    Learn More...
  4. Mica Foil

    Mica Foil

    DESCRIPTION:

    Phlogopite mica bonded with silicone resin (combi backed with ceramic paper) These products have excellent heat resistant properties, remain flexible after use at elevated temperatures and are completely free of asbestos.

     


    Learn More...
  5. Plumbago

    Plumbago

     DESCRIPTION:

    A crystalline or flake form of naturally occurring Graphite, often called Plumbago.

    PLUMBAGO is a lustrous grey-black powder. It contains a high purity graphitic carbon which has a hexagonal crystallographic structure.

    PHYSICAL & CHEMICAL PROPERTIES:

    Physical Form:      Flake or crystalline powder
    Colour :                   Grey-black
    Feel:                        Sleeky, greasy
    Specific Gravity:     2.3
    Carbon content:    85 - 90%
    Ash content:           <12%
    Moisture & Volatiles: <1.5%
    Sizing                : + 150 BSS = 1% Max
                                 + 200 BSS = 9% Max
                                  - 200 BSS = >90%
     


    Learn More...
  6. Ferro Sulphur (Iron Pyrite)

    Ferro Sulphur (Iron Pyrite)

    In foundries, during electric melting, residual sulphur level decreases due to cleaner melting practices and the use of low sulphur steel scrap. It is found that iron does not readily respond to inoculants if Sulphur is below 0.04%. Then it is necessary to resulphurize by using Ferrous Sulphide to hold the level in 0.05% to 0.12% range.

    In Alloy And Stainless Steel Industries To Control Hydrogen Embrittlement It is very convenient and economic to use Ferrous Sulphide for resulphurization in these steels to hold the right level of 'S' and ensuring not to drop 'S' level below 0.015% as these steels carry a minimum sulphur specification.

     


    Learn More...
  7. Furan

    Furan

    Introduction
    SQG series No Bake Furan Resin is a kind of environmentally friendly foundry binder.

    Different types of resins can be used for steel casting, iron casting and non-ferrous casting. They appear pale yellow to red brown transparent liquid with the following characteristics:

    •    Low viscosity increases the speed of resin addition and the fluidity of moulding sand.

    •    Low free Formaldehyde content and less odour. This improves working condition and lightens environmental pollution.

    •    High strength reduces resin addition ratio, which means lower cost and higher quality of castings.

    •    Good collapsibility, high precision of casting with clear-cut and clean surface reduces the workload for cleaning and improves work efficiency.
     


    Learn More...
  8. CMS Stop Coat

    CMS Stop Coat

    A light reddish-brown water based ceramic coating used for the prevention of carburisation or decarburisation of steel during the Heat Treatment process. It can be used with or without atmospheres, with pack hardening or carburising materials.


    Learn More...
  9. Graphcoat S Spray

    Graphcoat S Spray

    A grey-black Solvent Based Graphitic coating for foundry cores and moulds.

    CMS GRAPHCOAT  S-Spray is formulated using a high purity crystalline graphite and supplied in a pre-diluted, ready-to-use form.

     


    Learn More...
  10. Trueline Dowels

    Trueline Dowels

    True-Line Steel Dowels are broached and flange-slotted which means that:
    * They can be inserted easily, accurately and quickly.
    * Because of the slotted flange, the Bushing and Pin can be removed with wrenches that are either flange-slotted or broached, even if the Pin is broken.
    * Tapered shaft design of Pin and square shoulders contribute to accurate alignment.
     


    Learn More...

Items 1 to 10 of 92 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Ascending Direction