Search results for 'de'

Items 1 to 10 of 91 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Ascending Direction
  1. CMS Mould Grip 2

    CMS Mould Grip 2

    A sodium silicate based adhesive formulation for sticking cores or moulds and also for general repair work. Unlike conventional silicate based glues, it is modified with an organic additive to provide fast setting and improved thermal break-down of jointline after casting.

    Available in 25kg pails or convenient 1.8kg palstic bottles.


    Learn More...
  2. Parting Powder

    Parting Powder

    PARTING POWDER is a white, inert refractory mineral combined with a flow promoter and anti-caking additive for use on moulding patterns and core boxes to ensure easy removal of the sand.


    Learn More...
  3. Strontium Rod

    Strontium Rod

    Strontium modification is essential in the production of structurally sound and dimensionally accurate Al-Si castings and fabricated products. Strontium offers clear advantages over sodium-or antimony-based alloy additives, including safer addition, better recovery, reduced fade and a
    fume-free application.

    500mm rods, Sr 10%, Ti 1.0%, B 0.2%
     


    Learn More...
  4. Ferro Vanadium

    Ferro Vanadium

    This high-quality product is the universal strengthener and hardener for high-strength steels, tool steels, and other ferrous-based products.


    Learn More...
  5. Carbon Control

    Carbon Control

     Based on the Thermal Analysis of a solidifying metal sample, Heraeus Electro-Nite's instant carbon control sensors are available as a crucible version or as an immersion sensor. During primary steel melting and steel foundry casting, an instant carbon measurement prior to tap can avoid time delays and off-specification chemistry, especially where medium carbon tap levels are common.


    Learn More...
  6. Calcium Silicon Manganese

    Calcium Silicon Manganese

    Used in the Steel Foundry Industry as a deoxidant in steel castings or in certain steels where a low residual aluminium is required.


    Learn More...
  7. CMS Cast 1750

    CMS Cast 1750

    A high alumina, conventionally bonded Castable with high strength, good dimensional stability and resistance to abrasion. It is used for service temperatures up to 1750 deg C.

     


    Learn More...
  8. Blue Gel Coat - Technirez ADR2529

    Blue Gel Coat - Technirez ADR2529

    Technirez ADR2529 is a solvent free, thixotropic epoxy resin that will cure at room temperature for tooling and patternmaking applications.


    Learn More...
  9. Hi Temp Zetex 9" Overmitt

    Hi Temp Zetex 9" Overmitt

    ZetexPlus 200 Series gloves and mitts are made from ZetexPlus fabric, with the proprietary ZetexPlus Vermiculite coating to provide protection in temperatures to 2000°F. 

    All Newtex Extreme Protective Gloves & Mitts are double-stitched and reinforced.

     


    Learn More...
  10. CMS Castkleen A

    CMS Castkleen A

    CASTKLEEN A is a premium Grade Processed flux prepared to assist in the efficient removal of Slag and Dross from Furnaces and Ladles. Unlike many other Slag Coagulants, Castkleen A produces minimum spatter on addition which improves the Foundry environment and lessens the risk of airborne particles causing eye injury to Furnace men and Ladle operators.

    The Slag Coagulation properties of Castkleen A are excellent, Slag and Dross Coagulation is immediate on addition and excessive stirring of the Molten Metal is not required. Unlike many lesser quality Slag Coagulants, Castkleen A remains intact when attempting to remove from the Molten Metal surface. This results in considerable time savings and Slag free Metal.

    Regular use of Castkleen A assists in maintaining a clean working face on refractories, thus improving the service life of furnaces and ladles previously knocked out due to Slag build up.
     


    Learn More...

Items 1 to 10 of 91 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Ascending Direction