Search results for 'comp'

Items 1 to 10 of 28 total

per page
Page:
  1. 1
  2. 2
  3. 3

Set Ascending Direction
  1. CMS Mould Release W

    CMS Mould Release W

    A fast drying solvent based liquid release agent for foundry patterns and core boxes used for the production of moulds and cores in cold setting chemical sands.


    Learn More...
  2. Ebalta OH11 Steel

    Ebalta OH11 Steel

    Ebalta OH 11 steel   is a two component polyurethane gel- coat.
    OH 11 steel consists of polyols and additives including fine steel  poweder,  which when cured  results  in  a  hard  tough surface that is wear and heat resistant.

    OH 11 steel is especially formulated for the facing of press tools backed with GM 921 and steel granules.
     


    Learn More...
  3. CMS Stop Coat

    CMS Stop Coat

    A light reddish-brown water based ceramic coating used for the prevention of carburisation or decarburisation of steel during the Heat Treatment process. It can be used with or without atmospheres, with pack hardening or carburising materials.


    Learn More...
  4. Samplers

    Samplers

    A wide range of application tailored samplers for various types of molten metals complete the Heraeus Electro-Nite scope of supply. Simple to apply, easy to strip and representative for the melt, these are the characteristics of a good sampler. For ultra-clean sampling from steel melts we offer a special pneumatic sampling system. This and combined to a design for rapid preparation and suited for automatic handling make our samplers preferred choice.


    Learn More...
  5. Mica Foil

    Mica Foil

    DESCRIPTION:

    Phlogopite mica bonded with silicone resin (combi backed with ceramic paper) These products have excellent heat resistant properties, remain flexible after use at elevated temperatures and are completely free of asbestos.

     


    Learn More...
  6. Styrotherm Insulating Tiles

    Styrotherm Insulating Tiles

    Lightweight insulation tile used for large feeders and other high temperature insulation applications.

    Styrotherm-G riser lining tiles do not evolve any gas during casting and because of the low density of approximately 0.6 g/cm3 cause an extension factor of solidification of 2.2. This corresponds to a modulus extension factor of 1.45

    The tiles are pale yellow in colour, have a trapezoidal profile section, and are machined for improves flatness and accuracy.
     


    Learn More...
  7. Coil Grout

    Coil Grout

    A conventional, hydraulically bonded grouting castable of the high alumina class with good strength and dimensional stability.


    Learn More...
  8. Mudding Compound

    Mudding Compound

    DESCRIPTION:

    A grey-black water based refractory sealing compound designed for general repairs to foundry cores and moulds.

    CMS MUDDING COMPOUND contains high purity graphite. It is supplied in a ready-to-use paste form, with excellent filling and sleeking properties suitable for all organic and inorganic bonded sands.

    PHYSICAL PROPERTIES:

    Colour                  : Grey-black
    Physical Form      : Thick paste
    Specific Gravity    : 1.50 - 1.70 Kg / Ltr
     


    Learn More...
  9. Iron Cement

    Iron Cement

    DESCRIPTION :                                      

    IRON CEMENT is an air-setting material designed as a “cosmetic repair compound” for surface defects in ferrous castings. It is supplied in a dry powder form for mixing with appropriate amount of water to a suitable paste-like consistency.

    PHYSICAL PROPERTIES :

    Setting Mechanism         : Air-setting
    Physical Form                 : Dry Powder
    Colour                             : Grey   
    Diluent For Mixing           : Water
     


    Learn More...
  10. Parting Powder

    Parting Powder

    PARTING POWDER is a white, inert refractory mineral combined with a flow promoter and anti-caking additive for use on moulding patterns and core boxes to ensure easy removal of the sand.


    Learn More...

Items 1 to 10 of 28 total

per page
Page:
  1. 1
  2. 2
  3. 3

Set Ascending Direction