Search results for 'cms filler'

Items 1 to 10 of 27 total

per page
Page:
  1. 1
  2. 2
  3. 3

Set Ascending Direction
  1. CMS Filler G

    CMS Filler G

    Light weight filler powder.


    Learn More...
  2. Ebalta SG130L/PUR11

    Ebalta SG130L/PUR11

    Ebalta SG130L/PUR 11 is an unfilled, low viscosity 2 component polyurethane system and final properties are dependent on type and quantity of fillers used.

    SG130L/Pur 11 will accept high filler loading and can subsequently be cast in larger volumes.


    Learn More...
  3. CMS Mould Release W

    CMS Mould Release W

    A fast drying solvent based liquid release agent for foundry patterns and core boxes used for the production of moulds and cores in cold setting chemical sands.


    Learn More...
  4. CMS Stop Coat

    CMS Stop Coat

    A light reddish-brown water based ceramic coating used for the prevention of carburisation or decarburisation of steel during the Heat Treatment process. It can be used with or without atmospheres, with pack hardening or carburising materials.


    Learn More...
  5. Petrobond

    Petrobond

    CMS PETROBOND is a waterless moulding sand designed for use by the non-ferrous foundries to produce castings when extremely fine casting finish is desirable.

    It is supplied in a convenient, ready-for-use form. As it is a non-drying oil based sand mix, it can be readily reclaimed and reused several times after casting and knock-out operations.
     


    Learn More...
  6. Nozzles

    Nozzles

    The CMS Nozzle is a high quality cast refractory nozzle used in bottom pouring applications for ferrous castings.

    CMS Nozzles are a reverse tapered design, manufactured in three profiles, series A, series B and series D. Bore sizes range from 25 mm to 100 mm.

    CMS Nozzles can be changed hot or cold from underneath the ladle, permitting the same ladle to be used a number of times throughout the day.

    The selection of nozzle refractory depends on the actual service conditions.
     


    Learn More...
  7. Mortar 1650AW

    Mortar 1650AW

    DESCRIPTION :                                       

    CMS MORTAR 1650AW is a general purpose super duty Air-setting mortar with exceptional properties and uses. It is supplied Wet, in a paste-like ‘ready-for-use’ consistency.

    CMS MORTAR 1650AW can be used in a myriad of ways to bond, coat, repair and patch a wide range of refractory products.

    Ideal for patching cracked Investment Casting Shells.


    Learn More...
  8. Duracap

    Duracap

    CMS Duracap is a chemically bonded, high alumina induction furnace capping material. It is used as a capping for both basic and neutral induction furnace linings and can be easily applied to achieve on-going repairs. CMS Duracap is supplied in a ready-to-use form.
     


    Learn More...
  9. Coil Grout

    Coil Grout

    A conventional, hydraulically bonded grouting castable of the high alumina class with good strength and dimensional stability.


    Learn More...
  10. Mudding Compound

    Mudding Compound

    DESCRIPTION:

    A grey-black water based refractory sealing compound designed for general repairs to foundry cores and moulds.

    CMS MUDDING COMPOUND contains high purity graphite. It is supplied in a ready-to-use paste form, with excellent filling and sleeking properties suitable for all organic and inorganic bonded sands.

    PHYSICAL PROPERTIES:

    Colour                  : Grey-black
    Physical Form      : Thick paste
    Specific Gravity    : 1.50 - 1.70 Kg / Ltr
     


    Learn More...

Items 1 to 10 of 27 total

per page
Page:
  1. 1
  2. 2
  3. 3

Set Ascending Direction