Search results for 'Liquid Sodium Silicate Core'

Items 1 to 10 of 33 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Set Ascending Direction
  1. CMS Sodasil Premium

    CMS Sodasil Premium

    A semi-translucent, liquid Sodium Silicate binder for the production of foundry cores and moulds by Silicate/CO2 or Ester Catalysed Silicate processes. It has an organic additive incorporated to assist breakdown or shakeout after casting.

     


    Learn More...
  2. CMS Sodasil G

    CMS Sodasil G

    A colourless, semi-translucent liquid Sodium Silicate binder for the production of foundry cores and moulds by Silicate/CO2 process. 


    Learn More...
  3. CMS Mould Release W

    CMS Mould Release W

    A fast drying solvent based liquid release agent for foundry patterns and core boxes used for the production of moulds and cores in cold setting chemical sands.


    Learn More...
  4. CMS Rezcoat

    CMS Rezcoat

    CMS REZCOAT is a low viscosity, solvent based core and mould coating for hardening most sand surfaces. It is specifically designed for Green sand and Silicate sand in both ferrous and non-ferrous applications.
     


    Learn More...
  5. CMS Mould Grip 2

    CMS Mould Grip 2

    A sodium silicate based adhesive formulation for sticking cores or moulds and also for general repair work. Unlike conventional silicate based glues, it is modified with an organic additive to provide fast setting and improved thermal break-down of jointline after casting.

    Available in 25kg pails or convenient 1.8kg palstic bottles.


    Learn More...
  6. Furan

    Furan

    Introduction
    SQG series No Bake Furan Resin is a kind of environmentally friendly foundry binder.

    Different types of resins can be used for steel casting, iron casting and non-ferrous casting. They appear pale yellow to red brown transparent liquid with the following characteristics:

    •    Low viscosity increases the speed of resin addition and the fluidity of moulding sand.

    •    Low free Formaldehyde content and less odour. This improves working condition and lightens environmental pollution.

    •    High strength reduces resin addition ratio, which means lower cost and higher quality of castings.

    •    Good collapsibility, high precision of casting with clear-cut and clean surface reduces the workload for cleaning and improves work efficiency.
     


    Learn More...
  7. Ebaboard PW920

    Ebaboard PW920

    Ebaboard PW 920  is a synthetic board material, that is of a stable uniform structure and parallel faces. It can be cut and shaped  using regular woodworking tools.

    During the process of machining, routing etc., there is a minimum generation of dust.

    Models produced from ebaboard PW 920, are virtually shrinkage free good edge strength, and are extremely stable due to very low water absorption.


    The boards can be easily bonded using ebaboard PW 920 adhesive. Contains no halogene, flexibilisator, solvent or FCKW.

    Density 1.2g/cm3


    Learn More...
  8. Nylon Core Vents

    Nylon Core Vents

    Available in a range of sizes.


    Learn More...
  9. Core Lifters
  10. Chaplets

    Chaplets

    Chaplets are used to support a core from the bottom,or to anchor it from the top to prevent floating.However,it is quite as important to secure it against lateral shifting due to unequal pressure of the metal while pouring.

    Various sizes and configurations are available.


    Learn More...

Items 1 to 10 of 33 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Set Ascending Direction